PRODUKTY
DODÁVATELIA
JVC DT-3D24G1
Excelentný 24" 3D štúdiový monitor je vybavený profesionálnymi funkciami zo série DT-V, stereoskopický obraz je zobrazovaný kruhovou polarizáciou, podpora Side by Side alebo Line by Line, waveform, vectorscope, dual TC
Cena:
na ponuku
na ponuku
Type | Multi-format 3D LCD Monitor |
Screen size | Type 24 wide format |
LCD SECTION | |
LCD type | 24˝ wide, active matrix TFT |
Effective screen size W x H x Diagonal |
518.4 x 324 x 611.3 mm (20-1/2˝ x 12-7/8˝ x 24-1/4˝) |
Number of pixels displayed | 1920 x 1200 |
Number of colors displayed | 16.77 million |
Contrast ratio | (TYP.) 1000:1 |
Aspect ratio | 16:10 |
Format |
3G SDI: SMPTE424M/SMPTE425M DUAL LINK HD SDI: SMPTE372M HD SDI: BTA S-004C, SMPTE292M SD SDI: ITU-R BT.656: 525/625 |
INPUT/OUTPUT TERMINALS | |
Video input | |
DVI-D |
DVI-D signal input (compatible with HDCP) DVI-D connector x 1 (compatible with DDC2B) |
E. AUDIO 3G SDI/HD SDI/SD SDI |
Digital signal input (compatible with EMBEDDED AUDIO/ DUAL LINK signals): Auto detection, 2 line, BNC connector x 2 |
E. AUDIO 3G SDI/HD SDI/SD SDI (ACTIVE OUT) |
Digital signal output (compatible with EMBEDDED AUDIO signals): 2 line reclocked out, BNC connector x 2 |
Audio input | |
AUDIO (IN) |
Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance |
AUDIO (MONITOR OUT) |
Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms) |
Audio output | Internal speaker: 1.0 W + 1.0 W |
External controls | |
REMOTE (MAKE/TRIGGER: 8 pins) |
Female: PIN1, 2, 3, 4, 5, Tally on/off, External control valid/invalid, and GND |
REMOTE (RS-485: 8 pins for IN/OUT) |
Female: TXD+, TXD-, RXD+, NC, NC, RXD-, NC, and GND |
REMOTE (RS-232C: 9 pins) |
Female: NC, RXD, TXD, NC, GND, NC, RTS, CTS, and NC (Note: the 7th and 8th terminals are connected) |
GENERAL | |
Operation environment |
Operating temperature: 5˚C – 35˚C (41˚F – 95˚F) Operating humidity |
Power requirements |
AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz, or DC 24 V (Voltage range: DC 23.3 V − DC 25.5 V) |
Rated current |
1.15 A (AC 120 V) 0.67 A (AC 220 – 240 V) 4.8 A (DC 24 V) |
External dimensions: W x H x D excluding protrusions | |
With stand | 564 x 448.6 x 243 mm (22-1/4" x 17-3/4" x 9-5/8") |
Withou stand | 564 x 408 x 99 mm (22-1/4" x 16-1/8" x 4") |
Mass With stand / Without stand | 12.0 kg (26.4 lbs) / 9.1 kg (20.0 lbs) |
Accessories |
AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder), Circular polarizing glasses x 2 (for 3D viewing, not under warranty) |
Kód produktu: DT3D24G1